|
|
|
|
|
ISITICILAR |
|
|
|
 |
| Read
more about the benefits of these
standard induction heaters.
Underneath all models are
depicted. |
| |
WHY USE INDUCTION HEATING?
Induction heating is a superior,
fast and controlled heating
method. It is a safe and
environmentally friendly
alternative for traditional
heating methods such as ovens,
oil baths or blow torches. These
methods cause smoke, fumes or
oil waste and are hazardous for
personal health and safety.
FOR BEARINGS AND OTHER
COMPONENTS
Bega
induction heaters are versatile
and can also be used for heating
of gear wheels, bushes,
couplings etc. It is common
knowledge that a correct
mounting method extends bearing
life.
Controlled induction heating
prevents unnecessary damage, and
retains original pre-lubrication.
Induction heaters are ideal for
sealed bearings (2RS-ZZ).
SAFE AND CONTROLLED HEATING
· Digital
electronics provide optimal
control during the heating
process and automatically select
the most efficient power supply
to ensure a balanced and fast
heating.
· No
extra steps are necessary.
· Explosive
heating is impossible (no
discoloration or pitting of
material).
· 3
years warranty! The
electronic unit is supplied with
a 3 year warranty.
·
DEPENDABLE QUALITY
Our induction heaters are proved
dependable.
The electronics can handle
continuous use in production due
to the excellent cooling
lamellae.
The robust and easy-to-use
design offers you the security
of a reliable heater that is
suitable for continuous
operation in an industrial
environment.
ADVANTAGES OF BEGA
INDUCTION HEATERS
· Robust
design for working in industrial
environment
· Microprocessor
controlled electronics prevent
over-heating and explosive
heating
· · of
component
· · unique
easy-to-use swivel arm
· maintenance
free
· suitable
for continuous working
· automatic
demagnetisation
· automatic
power reduction
· large
standard range
· meets
CE and IEC requirements
· · · ·
SERVICE
Our manuals show clear
instructions. If you have any
questions about your induction
heater simply contact our
service department. You will get
expert advice from skilled
specialists.
|
|
 |
Betex 22 ELD portable,
3.6 kVA
Portable induction heater, min.
bore 15 mm! |
| |
Betex 22
ELD portable 3.6 kVA
Portable heater in handy
carrying case.
Ideal for service engineers to
use on site.
Standard incl. 4 yokes, diameter
10, 14, 20, 40 mm.
min. en max. sizes of
components to be heated:
min. bore: 15 mm
max. OD: 210 mm
max. width: 120 mm
max. weight of bearing to be
heated: 15 kg
max. weight of other components:
10 kg
Technical specifications:
|
|
 |
NEW! BETEX 24 RLD TURBO portable,
3.6 kVA
New generation TURBO heaters
with low facility power and high
output. For components min. bore
10 mm to 40 kg. |
| |
NEW!
Betex 24 RLD TURBO portable, 3.6
kVA
New
Generation, extra powerfull
heaters.
Low facility power, high output.
With supports for heating in
horizontal position;
Includes 5 yokes: diameter 7,
10, 14, 20, 40 mm.
Min. bore 10 mm!
Heats parts upto 40 kg!
Ideal for service engineers on
site.
min. / max. sizes of
components to be heated:
min. bore: 10 mm
max. OD: 350 mm
max. width: 130 mm
max. weight of bearing to be
heated: 40 kg
max. weight of other components:
25 kg
|
|
 |
NEW! Betex 24 RD TURBO, 3.6 kVA
New generation TURBO heaters
with low facility power and high
output. For parts min. bore 15
mm upto 95 kg! |
| |
NEW!
Betex 24 RD TURBO, 3.6 kVA
New
Generation, extra powerfull
heaters.
Low facility power, high output.
With supports for heating in
horizontal position;
Choice of 7 yokes: diameter 10,
14, 20, 30, 40, 50, 60 mm.
Min. bore 15 mm!
Heats parts upto 95 kg!
Basic benchtop model with loose
yokes
min. / max. sizes of
components to be heated:
min. bore: 15 mm
max. OD: 520/750 mm
max. width: 230 mm
max. weight of bearing to be
heated: 95 kg
max. weight of other components:
50 kg |
|
 |
NEW! Betex 24 RSD TURBO, 3.6 kVA
New generation TURBO heatersr
with low facility power and high
output. For parts min. bore 15
mm upto 95 kg! |
| |
NEW!
Betex 24 RSD TURBO, 3.6 kVA
New
Generation, extra powerfull
heaters.
Low facility power, high output.
With supports for heating in
horizontal position;
Choice of 7 yokes: diameter 10,
14, 20, 30, 40, 50, 60 mm.
Min. bore 15 mm!
Heats parts upto 95 kg!
Basic benchtop model with
ergonomic swivel arm
min. / max. sizes of
components to be heated:
min. bore: 15 mm
max. OD: 520/750 mm
max. width: 230 mm
max. weight of bearing to be
heated: 95 kg
max. weight of other components:
50 kg
|
|
 |
NEW! Betex 40 RMD TURBO, 12 kVA
New generation heater with low
facility power |
| |
NEW!
Betex 40 RMD TURBO, 12 kVA
Features:
mobile, powerful heater with
ergonomic swing arm for parts
upto approx. 550 kg. Practical
pivoting operation panel and
sliding supports allow easy
operation. The Betex 40 RMD
turbo is very suitable for
continuous use. Smallest bore
size is 60mm. Heats components
in horizontal or vertical
position. 400, 450 of 500 Volt.
Choice out of 3 yokes (swivel):
diameter 40, 60, 80 mm.
When time is ultimate, this
heater heats very fast in
comparison with other standard
heaters.
Ideally suited for machine
builders (gear wheels) and for
transport sector
min. en max. sizes of
components to be heated:
min. bore: 60 mm
max. OD: 920 mm
max. width: 350 mm
max. weight of bearing to be
heated: 550 kg
max. weight of other components:
450 kg
Other sizes OD, width or hight
on request.
Heating examples:
Bearing no.
23156, 95,8 kg
OD: 460
ID: 280
Temp.: 110°C
Time: 3.30 min
Bearing no. 23172, 220 kg
OD: 600
ID: 360
Temp.: 110°C
Time: 8.40 min
Gear wheel, 300 kg
OD: 600
ID: 210
Temp.: 110°C
Time: 3.05 min
|
|
 |
Betex 22 ED, 3.6 kVA
Basic bench top model for
bearings to ± 35 kg |
| |
Betex 22
ED 3.6 kVA
Basic bench-top type with
choice of 7 yokes. Suitable for
continuous use. For bearings
upto ± 35 kg.
Heats components in horizontal
or vertical position.
Choice of 2 sets yokes,
diameters: 10, 14, 20, 30, 40,
50, 60 mm.
min. en max. sizes of
components to be heated:
min. bore: 15 mm
max. OD: 340 mm
max. width: 150 mm
max. OD with extension yokes:
480 mm
max. width/hight with extension
yokes: 260 mm
max. weight of bearing to be
heated: 35 kg
max. weight of other components:
20 kg
Technical specifications:
|
|
 |
Betex 22 ESD, 3.6 kVA
Basic bench top model with
swivel arm for ergonomic working,
for bearings up to ± 35 kg |
| |
Betex 22
ESD 3.6 kVA
Basic bench-top type with
unique swivel arm. Suitable for
continuous use. For bearings
upto ± 35 kg.
Heats components in horizontal
or vertical position.
Choice of 2 sets yokes,
diameters: 10, 14, 20, 30, 40,
50, 60 mm.
min. en max. sizes of
components to be heated:
min. bore: 15 mm
max. OD: 340 mm
max. width: 150 mm
max. OD with extension yokes:
480 mm
max. width/hight with extension
yokes: 260 mm
max. weight of bearing to be
heated: 35 kg
max. weight of other components:
20 kg
Technical specifications:
|
|
 |
Betex 38 ESD, 8 kVA
Bench top model with swivel arm
for bearings upto ± 125 kg |
| |
Betex 38
ESD 8 kVA
Bench top type with unique
swivel arm. For bearings up to ±
125 kg.
Heats in horizontal or vertical
position.
400, 450 of 500 Volt
Choice out of 5 yokes (swivel):
diameter 20, 30 ,40, 50, 70 mm
min. en max. sizes of
components to be heated:
min. bore: 30 mm
max. OD: 480 mm
max. width: 200 mm
max. OD with extension yokes:
720 mm
max. width/hight with extension
yokes: 330 mm
max. weight of bearing to be
heated: 125 kg
max. weight of other components:
75 kg
Technical specifications:
|
|
 |
Betex 38 ZFD, 12 kVA
Powerful roll-around heater with
swivel arm for bearings upto ±
250 kg |
| |
Betex 38
ZFD, 12 kVA
Mobile, powerful heater with
swivel arm for bearings upto ±
250 kg. With handy rotating
operating panel. Heats in
horizontal or vertical position.
400, 450 or 500 Volt.
Choice out of 5 yokes (swivel):
diameter 20, 30, 40, 60, 80 mm
min. / max. sizes of
components to be heated:
min. bore: 30 mm
max. OD: 700 mm
max. width: 265 mm
max. OD with extension yokes:
1020 mm
max. width/hight with extension
yokes: 460 mm
max. weight of bearing to be
heated: 250 kg
max. weight of other components:
150 kg
Technical specifications:
|
|
 |
Betex 38 ZFD, 24 kVA
Powerful roll-around heater with
swivel arm for bearings upto ±
350 kg |
| |
Betex 38 ZFD, 24 kVA
Mobile,
heavy duty heater with unique
swivel arm for components up to
± 350 kg. Includes practical
rotating operating panel. Heats
parts in horizontal or vertical
position.
400, 450 or 500 Volt.
Choice out of 5 (swivel) yokes:
diameter 20, 30, 40, 60, 80 mm
min. / max. sizes of
components to be heated:
min. bore: 30 mm
max. OD: 700 mm
max. width: 265 mm
max. OD with extension yokes:
1020 mm
max. width/hight with extension
yokes: 460 mm
max. weight of bearing to be
heated: 250 kg
max. weight of other components:
150 kg
|
|
 |
Betex SUPER, 24 kVA
Powerfull heater for heavy duty,
for bearings upto ± 600 kg. |
| |
Betex SUPER
24 kVA
Powerful heater for
exceptionally heavy components
upto ± 600 kg. Heats components
in horizontal or vertical
position. 400, 450 of 500 Volt.
Choice out of 3 yokes: diameter
60, 80, 100 mm.
Ideally suited for workshops
in the heavy industry, railways,
repair shops, paper mills etc.
min. en max. sizes of
components to be heated:
min. bore: 60 mm
max. OD: 900 mm
max. width: 400 mm
max. weight of bearing to be
heated: 600 kg
max. weight of other components:
350 kg
Other sizes OD, width or hight
on request.
|
|
 |
Betex GIANT, 40 kVA
Powerful heater for heavy duty,
for bearings upto ± 1250 kg. |
| |
Betex GIANT 40 kVA
Powerful heater for heavy duty,
for bearings upto ± 1250 kg.
Heats components in horizontal
or vertical position. 400, 450
of 500 Volt. Choice out of 4
yokes (swivel): diameter 60, 80,
100, 150 mm.
Ideally suited for work shops in
the heavy industry, railways,
repair shops, paper mills etc.
min. en max. sizes of
components to be heated:
min. bore: 85 mm
max. OD: 1400 mm
max. width: 450 mm
max. weight of bearing to be
heated: 1250 kg
max. weight of other components:
750 kg
Other sizes OD, width or hight
on request.
|
|
 |
Betex GIGANT L, XL, XXL, 95 kVA
Powerful induction heaters for
exceptional heavy duty upto ±
11.000 kg |
| |
Betex GIGANT XL, GIGANT XXL,
upto 95 kVA
These are the champions
amoung the heaters! Designed for
exceptionally heavy duty.
This
induction heater, a GIANT XL, 95
kVA, can heat components of ±
11.000 kg!
Heats components in horizontal
or vertical position.
These heaters are popular in
work shops in the heavy industry,
for example:
- steel
- railway
- paper
- gear wheel manufacturers
min. en max. sizes of
components to be heated:
min. bore: 145 mm
max. OD: 2500 mm
max. width: 700 mm
max. weight of bearing to be
heated: on request
max. weight of other components:
on request
Other sizes OD, width or hight
on request
|
|
|
|
